Good afternoon everyone .
I need help .

I have the following failure: the backup failed to back up the requested files ( 6).

Is this failure occurs in the backup of a virtual machine - Hyper V.

This client Machine was migrated from VMware to Hyper V.

Here some information from the environment :

MasterServer :
OS: Linux RedHat 6
Netbackup Version: 7.0.02

MediaServer : OS: Linux RedHat 6
Netbackup Version: 7.0.02

Server Hyper : Hyper V manager 6.3.9600
OS: Microsoft Winwdows Server 2012 R2 Datacenter

Attention : So checked in the following error in Integration Services on this client machine :

' WSUS - 1' : The Data Exchange integration service is not enabled Either , not running or not initialized . (Virtual machine 7FE73051 - C431-4BF3-9444-4846C0B6C3A6 ID )


The following attachments logs and failures ..

Windows 2008r2 Master and Media servers, Isilon storage

Hello again, all.

Im trying something that I never have yet, and am having little luck. Yet, I cant imagine this being a complicated configuration. I need to temporarily send backups to a CIF share that was created for me on an Isilon box and I have full access to the share. My backups usually go to DataDomain disk pools/storage units.

The thing is that im finding article after article on how to back up a CIF share, but not backup data TO a CIF share. I beleive I have to start by creating a storage unit that points to the location to which I want to send the backups, but thats where I'm getting stopped, and pretty sure Im missing steps. Ive named the new stiorage unit, selected disk as the storage unit type, BasicDisk as disk type(??), selected a media server I want it to use, entered the absolute path, but I cannot view the properties of the location. I just get that "Error reading volume information.STS API failed. Status 228", which leads me to believe I'm heading in entirely the wrong direction. Is anyone out there sending backups directly to a CIF share, and can shed some light on this for me? I'll provide whatever information needed about my current setup.

Thank you!!!

Todd 

Hi Everyone,
This is my first post in the forum.

Environment Details:

One Master/ Media server and two media servers.

Out of the two media servers, one uses a DELL ML6040 FC tape library. There are 5 FC tape drives present in the library which are not shared with other media servers.
DSSU starts duplication jobs for this media server but only 4 tape drives are being used and one is left free always.

This left tape drive is not the same. It shuffles across different tape drives.

DSSU is done using media manager created using a storage unit group.
Maximum concurrent write drives : 5
Maxmimum stream per drive: 8

MDS allocation is done only for 4 drives at any particular time.

bpstulist for robot storage unit group.
Label: XXXXXXXXX
Storage Unit Type: Media Manager
Host Connection: XXXXXXXXX
Number of Drives: 5
On Demand Only: no
Max MPX/drive: 8
Density: hcart3 - 1/2 Inch Cartridge 3
Robot Type/Number: TLD / 0
Max Fragment Size: 1048576 MB

Staging storage units point to the right media server in "Host connection"
nbrbutil -resetmediaserver <mediaserver> and ltid deamon was reset.

Kindly help me in resolving the issue.

hi Team, 

Does Netbackup Evaluation License  contains all features / funtionality of netbackup ? and how to check the Evaluation License   is standard base or capacity based?

Thank you

Hello ,

currently i have a customer willing to have backup to disk solution using netbackup . i am asking if there is any tool i can use to do the dimensioning for this solution ? how many disks i should use ? retention how it gonna affect ? what kind of compression i can use there ?

thanks
Mina

Hello,

We're using NBU 7.6.1, and we're asked to back up MacBook Pro (OS X Yosemite) today.
I'm not sure if it works or not, does anyone ever give it a try? 
Thanks!

OS:- Solaris

Clustered Master Server

We are having issue where we are unable to check the media tab from Java Console. As soon as we click on Media Tab we get the error

"Xonnection coould not be established timed out while making the connection verify the services or daemon are working fine"

I had verified all the daemons are UP and backups are working fine.We are able to view the content of library fine from GUI by running the inventory robot,also through CLI we are able to get all the information from bpmedia, vmquery, bpmedialist. Only problem we are having with Media Tab access vie GUI

We had also restarted the NBU but still we are unable to access it.

It has been over 10 months since I have used NetBackUp. I am out of touch with the trouble shooting process.Our old file servers from which the backups were created have been decommissioned. I need to restore a folder from a backup tape. I have the backup tapes I added them to the library and did an inventory. I then started Backup, Archieve and Restore. From FILE>SPECIFY NETBACKUP MACHINE AND POLICY TYPE I selected the following as per FIG 1. I started the restore with these settings in FIG 2. I get the following as per FIG 3.

I need immediate help as the tapes are due to expire after 5 hours.

I have about 4.5 TB on a basic disk storage unit that isnt valid I just discovered. The partition is 7TB used for Server_Diff storage.  This storage unit is for Diffs only and actively being written too without issue.  I notice these images are not listed in the catalog for the clients.  I did a search and didnt see anything identical to this issue in the forms.  If I delete these images manually is this going to cause any issues.  My thought is no based on my understanding, but I would love a more knowledgeable confirmation.  Thanks.

EDIT:  The images here shouldnt be older than 2 weeks based on retention.  Some are 2-3 months old.

I'm running Netbackup 7.5 in a Windows environment.  I have lots of Windows clients running backups to a Media Server Deduplication Pool and all the deduplication is happening on the media server.  I have a single master server. 

I have a remote office with 6 or 7 Windows servers that currently has its own media server and tape library but soon will have neither.  I will need to back them up to my local dedupe disk pool over the network.  Seems a good situation to enable client-side dedupe on those 6 or 7 servers. 

From what I can tell I need to go into the Properties of the Master Server under Host Properties.  Then under Client Attributes I make the change under Deduplication Location from 'Always use the media server' to 'Prefer to use client-side deduplication' (or Always use ...).

Since I only have one master server this is pretty much a global change, right?  I can go to each policy and check the 'disable client-side deduplication' box but that's a lot more work than just enabling client-side deduplication for a few servers. 

How do I enable client-side deduplication for just a handful of clients?  If I change the Deduplication Location in the Client Attributes of the Host Properties does it just apply to the clients listed in the client list or does it apply to all the clients of that master server?

Thanks a million.

Hi all,

Using nbu 7.6 as master/media server, and Windows2k8 client.
A CIFS share (30 million files) is backed up with Accelerator enabled.
I can see forced rescan is automatically used for some backups, even I don't enable it in the schedule.

Is it a bug?

Hello All,

Can you please share any Netbackup interview questions if you have. Iam looking to crack a job in this area. Also can you please let me know the area that interviewers will be stressing on if I go with 4 years of experience on resume. Appreciate your help on this. 

Hi ;

I'm newbie in Symantec Netbackup , i will be grateful if you could help me .

we need to backup from client to NAS Storage Directly  , without mounted the NAS Storage  to the media server. is it possible ? and if so how to implement it ?

BR

Deyaa

Hi All,

In a plan, I went to enable the NBAC on my standalone master server Using: \Program Files\Veritas\NetBackup\bin\admincmd>bpnbaz -setupmaster

Output ----

You will have to restart NetBackup services on this machine after the command completes successfully.
Do you want to continue(y/n)y
Gathering configuration information.
Please be patient as we wait for 10 sec for the security services to start their operation.
Generating identity for host 'nbmaster'
Setting up basic authorization information. Please be patient.
Basic authorization information generated successfully.
Granting authorization check permissions to host 'nbmaster'
Configuring authentication domains within Netbackup
Setting up authorization information in Netbackup configuration files.
Setting up NBAC on target host: nbmaster
Warning: NetBackup Master Server is currently configured in AUTOMATIC mode. Security will be enforced only in REQUIRED mode. This can be done after entire NetBackup domain is configured with NBAC
Operation completed successfully.

---------------------------

But after restarting my NBU Services i found that most of the netbackup services are not running. In event viewer i can see error EMM initilisation failure 334.

Post couple of R&D i dint resolve this issue. Finally i disabled the NBAC in Registry using USE_VXSS = PROHIBITED

After Server Restart, Services came up successfully.

Hi, 

There will be any issue if i backup active database in Full backup but backup passive database in Incremental. The real issue is when i backup incremental in passive database error 130 or another snapshot error happened. And when i backup full in active database same error happened no matter how many times i restart services or server. 

Thanks

Hello,

I've been trying to find out which version of Red Hat Enterprise Linux 7.1.0.2 is able to support? I've been looking through the software compatibility list and I am not clear based on the information provided.

For example in the NBU_76_SCL.pdf that I downloaded, it mentioned the Red Hat Enterprise 6 is supported with Minimum Netbackup 7.1.

Which version of RHEL or kernel level is supported by 7.1.0.2 ?

I am being asked whether our current  Netbackup system 7.1.0.2 is able to support the below version.

1. RHEL 6
2. RHEL 6.3
3. RHEL 6.6 and
4. RHEL 7.1

Please help.

Thanks

Chan

Strange issue.  Duplicaiton of a single backup image is failing to MSDP.  Consistent failure mode.  Strange thing is - it is a *single* VMware backup image... no issues with any other VMware images or any other types of images.

Environment:

• Solaris 10 master v. 7.6.1
• Symantec 5220 Appliance media servers v. 2.6.1
• Backup to Advanced Disk -> duplication to MSDP and tape

Job details:

04/06/2015 11:30:06 - started process bpdm (pid=13428)
04/06/2015 11:30:06 - Info bptm (pid=32082) backup child process is pid 32333
04/06/2015 11:30:06 - Info bpdm (pid=13428) reading backup image
04/06/2015 11:30:06 - Info bpdm (pid=13428) using 512 data buffers
04/06/2015 11:30:06 - Info bpdm (pid=13428) spawning a child process
04/06/2015 11:30:06 - Info bpbrm (pid=13428) child pid: 13429
04/06/2015 11:30:06 - Info bpdm (pid=13428) requesting nbjm for media
04/06/2015 11:30:07 - begin reading
04/06/2015 11:30:08 - Critical bptm (pid=32082) image write failed: error 2060022: software error
04/06/2015 11:30:13 - Error bptm (pid=32082) cannot write image to disk, Invalid argument
04/06/2015 11:30:13 - Error bpdm (pid=13429) cannot write data to socket, Connection reset by peer
04/06/2015 11:30:13 - Info bptm (pid=32082) EXITING with status 84 <----------
04/06/2015 11:30:13 - Info densyma02p (pid=32082) StorageServer=PureDisk:densyma02p; Report=PDDO Stats (multi-threaded stream used) for (densyma02p): scanned: 53251 KB, CR sent: 23 KB, CR sent over FC: 0 KB, dedup: 100.0%, cache disabled
04/06/2015 11:30:15 - Error bpdm (pid=13428) media manager terminated by parent process
04/06/2015 11:30:15 - Error bpduplicate (pid=5447) host densyma01p backup id dennagxip2_1428276467 read failed, media manager killed by signal (82).
04/06/2015 11:30:15 - Error bpduplicate (pid=5447) host densyma02p backupid dennagxip2_1428276467 write failed, media write error (84).
04/06/2015 11:30:15 - Error bpduplicate (pid=5447) Duplicate of backupid dennagxip2_1428276467 failed, media write error (84).
04/06/2015 11:30:15 - Error bpduplicate (pid=5447) Status = no images were successfully processed.
04/06/2015 11:30:15 - end Duplicate; elapsed time 0:00:22
no images were successfully processed  (191)

bptm log from target:

11:30:08.038 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: fbu_sort_extents: no imag
e extents
11:30:08.068 [32082] <2> send_media_kbytes_written_establish_threshold: CINDEX 0, RB Kbytes for m
onitoring = 3000000
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: fbu_fill_bitmap: (3437) s
tream_offset(999507456) + length(2560) > (3438) stream_offset(999507456)
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: fbu_scan_buf: fbu_fill_bi
tmap() failed (2060022:software error)
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: write_special_buf: fbu_sc
an_buf failed: (2060022:software error)
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: write_unknown_len_buf: wr
ite_special_buf() failed, byteswritten:<0>, status:<0x1> (2060022:software error)
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: impl_write_image: write_u
nknown_len_buf() failed (2060022:software error)
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: impl_write_image: STAT co
ntents:                                                                                          
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: impl_write_image: exit (0
 0x1 2060022:software error)                                                                     
11:30:08.928 [32082] <16> 8756459:bptm:32082:densyma02p: [ERROR] PDSTS: pi_write_image_v7: impl_w
rite_image() failed (2060022:software error)
11:30:08.928 [32082] <32> do_write_image: sts_write_image failed: byteswritten = 0, len = 201216
11:30:08.928 [32082] <32> do_write_image: sts_write_image failed: error 2060022 (54525952 201216
0)                                                                                               
11:30:08.929 [32082] <2> ConnectionCache::connectAndCache: Acquiring new connection for host oxfo
rdc, query type 1                                                                                
11:30:08.932 [32082] <2> vnet_pbxConnect: pbxConnectEx Succeeded                                 
11:30:08.932 [32082] <2> logconnections: BPDBM CONNECT FROM 169.143.74.89.44039 TO 169.143.74.127
.1556 fd = 0                                                                                     
11:30:08.944 [32082] <2> db_end: Need to collect reply                                           
11:30:08.955 [32082] <32> write_data: image write failed: error 2060022:                         
11:30:09.500 [32082] <2> delete_image_disk_sts_impl: Deleting disk header for dennagxip2_14282764
67_C2_HDR_R18                                                                                    
11:30:09.505 [32082] <2> ConnectionCache::connectAndCache: Acquiring new connection for host oxfo
rdc, query type 161                                                                              
11:30:09.509 [32082] <2> vnet_pbxConnect: pbxConnectEx Succeeded                                 
11:30:09.509 [32082] <2> logconnections: BPDBM CONNECT FROM 169.143.74.89.57919 TO 169.143.74.127
.1556 fd = 30                                                                                    
11:30:09.520 [32082] <2> db_end: Need to collect reply                                           
11:30:13.252 [32082] <2> ConnectionCache::connectAndCache: Acquiring new connection for host oxfo
rdc, query type 1  
11:30:13.255 [32082] <2> vnet_pbxConnect: pbxConnectEx Succeeded                                 
11:30:13.255 [32082] <2> logconnections: BPDBM CONNECT FROM 169.143.74.89.59894 TO 169.143.74.127
.1556 fd = 30                                                                                    
11:30:13.266 [32082] <2> db_end: Need to collect reply                                           
11:30:13.278 [32082] <16> write_data: cannot write image to disk, Invalid argument               
11:30:13.278 [32082] <4> write_backup: Calling close_all_ft_pipes                                
11:30:13.278 [32082] <2> KILL_MM_CHILD: Sending SIGUSR2 (kill) to child 32333 (bptm.c:19651)     
11:30:13.313 [32082] <2> bptm: Calling tpunmount for media @aaaal                                
11:30:13.313 [32082] <2> send_MDS_msg: MEDIA_DONE 0 8756459 0 @aaaal 0 180 {89BFC592-DC82-11E4-8B
AF-001B21890135}                                                                                 
11:30:13.313 [32082] <2> packageBptmResourceDoneMsg: msg (MEDIA_DONE 0 8756459 0 @aaaal 0 180 {89
BFC592-DC82-11E4-8BAF-001B21890135})                                                             
11:30:13.313 [32082] <2> packageBptmResourceDoneMsg: keyword MEDIA_DONE version 0 jobid 8756459 c
opyNum 0 mediaId @aaaal mediaKey 0 unloadDelay 180 allocId {89BFC592-DC82-11E4-8BAF-001B21890135}
11:30:13.313 [32082] <2> packageBptmResourceDoneMsg: returns 0                                   
11:30:13.315 [32082] <2> JobInst::sendIrmMsg: returning                                          
11:30:13.645 [32082] <2> main: Got bpduplicate acknowledgement status: 0, err: 0                 
11:30:13.645 [32082] <2> bptm: EXITING with status 84 <----------  

Dear all,

I'm trying to add a trusted master server but the following warning appears:

Although the master server specified is now identified as a trusted master server , a secure exchange was not made between these two hosts. This is because one of the master servers is rejecting connections. Please refer to the logs for further troubleshooting. After resolving the issue you need to reconfigure the trusted server. (5680)

I cann add a replication target server but doesn't allow to create SLP replication (access is denied 117).

below is the bptestbpcd log 

[root@server1 bpcd]# bptestbpcd -verbose -M server2 -debug
23:14:16.618 [5628] <2> bptestbpcd: VERBOSE = 5
23:14:16.622 [5628] <2> vnet_pbxConnect: pbxConnectEx Succeeded
23:14:16.622 [5628] <2> logconnections: BPCD CONNECT FROM 11.5.14.2.37857 TO 11.5.11.4.1556 fd = 3
23:14:16.623 [5628] <2> vnet_pbxConnect: pbxConnectEx Succeeded
23:14:16.626 [5628] <8> do_pbx_service: [vnet_connect.c:2152] via PBX VNETD CONNECT FROM 11.5.14.2.47416 TO 11.5.11.4.1556 fd = 4
23:14:16.626 [5628] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:443] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
23:14:16.667 [5628] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:460] ipc_string /usr/openv/var/tmp/vnet-42257428354848752212000000000-hWrISe
23:14:16.713 [5628] <2> ConnectToBPCD: bpcd_connect_and_verify(server2, server2) failed: 46
23:14:16.714 [5628] <2> vnet_pbxConnect: pbxConnectEx Succeeded
23:14:16.714 [5628] <2> logconnections: BPCD CONNECT FROM 11.5.14.2.54410 TO 11.5.11.4.1556 fd = 3
23:14:16.715 [5628] <2> vnet_pbxConnect: pbxConnectEx Succeeded
23:14:16.716 [5628] <8> do_pbx_service: [vnet_connect.c:2152] via PBX VNETD CONNECT FROM 11.5.14.2.36672 TO 11.5.11.4.1556 fd = 4
23:14:16.716 [5628] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:443] VN_REQUEST_CONNECT_FORWARD_SOCKET 10 0xa
23:14:16.756 [5628] <8> vnet_vnetd_connect_forward_socket_begin: [vnet_vnetd.c:460] ipc_string /usr/openv/var/tmp/vnet-42262428354848841259000000000-e3PFhl
23:14:16.802 [5628] <2> local_bpcr_connect: got an exit status error message:<?xml version="1.0" encoding="utf-8"?><StatusMsgDoc><StatusMsg NBUStatus="46" Severity="2" VXULoid="137" VXULtid="114"><P pos="0">bck1oam</P><P pos="1">11.5.14.2</P><P pos="2">server2</P><P pos="3">11.5.11.4</P><MsgString>Request&#32;from&#32;host&#32;bck1oam&#32;(11.5.14.2)&#32;to&#32;host&#32;server2&#32;(11.5.11.4)&#32;is&#32;not&#32;allowed&#32;access.</MsgString><StatusMsg NBUStatus="46" Severity="0" VXULoid="137" VXULtid="115"><P pos="0">bck1oam</P><P pos="1">11.5.14.2</P><P pos="2">server2</P><MsgString>Host&#32;bck1oam&#32;(11.5.14.2)&#32;is&#32;not&#32;an&#32;authorized&#32;server&#32;for&#32;host&#32;server2.</MsgString></StatusMsg></StatusMsg></StatusMsgDoc>
23:14:16.802 [5628] <2> ConnectToBPCD: bpcd_connect_and_verify(server2, server2) failed: 46
23:14:16.808 [5628] <2> InternalBuffer: <?xml version="1.0" encoding="utf-8"?><StatusMsgDoc><StatusMsg NBUStatus="46" Se
23:14:16.808 [5628] <2> InternalBuffer: verity="2" VXULoid="137" VXULtid="114"><P pos="0">bck1oam</P><P pos="1">10.5.149
23:14:16.808 [5628] <2> InternalBuffer: .2</P><P pos="2">server2</P><P pos="3">11.5.11.4</P><MsgString>Request&#32;f
23:14:16.809 [5628] <2> InternalBuffer: rom&#32;host&#32;bck1oam&#32;(11.5.14.2)&#32;to&#32;host&#32;server2&#32;(10
23:14:16.809 [5628] <2> InternalBuffer: .5.118.4)&#32;is&#32;not&#32;allowed&#32;access.</MsgString><StatusMsg NBUStatus
23:14:16.809 [5628] <2> InternalBuffer: ="46" Severity="0" VXULoid="137" VXULtid="115"><P pos="0">bck1oam</P><P pos="1">
23:14:16.809 [5628] <2> InternalBuffer: 11.5.14.2</P><P pos="2">server2</P><MsgString>Host&#32;bck1oam&#32;(10.5.149
23:14:16.809 [5628] <2> InternalBuffer: .2)&#32;is&#32;not&#32;an&#32;authorized&#32;server&#32;for&#32;host&#32;bckserv
23:14:16.809 [5628] <2> InternalBuffer: er2.</MsgString></StatusMsg></StatusMsg></StatusMsgDoc>
<16>bptestbpcd main: Function ConnectToBPCD(server1) failed: 46
23:14:16.809 [5628] <16> bptestbpcd main: Function ConnectToBPCD(server1) failed: 46
<16>bptestbpcd main: Request from host bck1oam (11.5.14.2) to host server2 (11.5.11.4) is not allowed access.
        Host bck1oam (11.5.14.2) is not an authorized server for host server2.
23:14:16.814 [5628] <16> bptestbpcd main: Request from host bck1oam (11.5.14.2) to host server2 (11.5.11.4) is not allowed access.
        Host bck1oam (11.5.14.2) is not an authorized server for host server2.
<2>bptestbpcd: server not allowed access
23:14:16.814 [5628] <2> bptestbpcd: server not allowed access
<2>bptestbpcd: EXIT status = 46
23:14:16.814 [5628] <2> bptestbpcd: EXIT status = 46

As suggested in the forums, i've checked the host files in both servers and they're ok. also resolution works. 

bp.conf contains the entries in both servers.

[root@server1 bpcd]# netstat -a|grep bpcd
tcp        0      0 0.0.0.0:bpcd            0.0.0.0:*               LISTEN
unix  2      [ ACC ]     STREAM     LISTENING     1401475  /usr/openv/var/vnetd/terminate_bpcd.uds
unix  2      [ ACC ]     STREAM     LISTENING     1401477  /usr/openv/var/vnetd/bpcd.uds
unix  3      [ ]         STREAM     CONNECTED     1399505  /tmp/PBXPIPEbpcd
[root@server1 bpcd]# pwd
/usr/openv/netbackup/logs/bpcd
[root@server1 bpcd]# cd ../../
[root@server1 netbackup]# cat bp.conf
SERVER = server1
SERVER = server2
CLIENT_NAME = server1
USE_VXSS = PROHIBITED
VXSS_SERVICE_TYPE = INTEGRITYANDCONFIDENTIALITY
EMMSERVER = server1
HOST_CACHE_TTL = 3600
VXDBMS_NB_DATA = /usr/openv/db/data
ALLOW_MEDIA_OVERWRITE = DBR
ALLOW_MEDIA_OVERWRITE = TAR
ALLOW_MEDIA_OVERWRITE = CPIO
ALLOW_MEDIA_OVERWRITE = ANSI
ALLOW_MEDIA_OVERWRITE = AOS/VS
ALLOW_MEDIA_OVERWRITE = MTF1
ALLOW_MEDIA_OVERWRITE = RS-MTF1
ALLOW_MEDIA_OVERWRITE = BE-MTF1
JOB_PRIORITY = 0 0 90000 90000 90000 90000 85000 85000 80000 80000 80000 80000 75000 75000 70000 70000 50000 50000 45000 0 0 0 0 0
CLIENT_PORT_WINDOW = 0 0
VERBOSE = 5
ENABLE_ROBUST_LOGGING = YES
TRUSTED_MASTER = bckserver2
TELEMETRY_UPLOAD = YES
[root@server1 netbackup]#

Firewall rules are flushed in both servers.

[root@server1 netbackup]# iptables --list
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

[root@server1 netbackup]# bptestnetconn
SERVER = server1
SERVER = server2
------------------------------------------------------------------------
NBU IP_ADDRESS_FAMILY configured to use Remote Addresses:  IPv4(yes) IPv6(no)
FL:               server1 -> 11.5.14.4                              :      0 ms FAST (< 5 sec) [local] SRC: ANY
FL:               server2 -> 11.5.11.4                              :      2 ms FAST (< 5 sec) SRC: ANY
------------------------------------------------------------------------
RL:                              11.5.14.4 -> server1 :      0 ms FAST (< 5 sec)
RL:                              11.5.11.4 -> server2 :      0 ms FAST (< 5 sec)
RL:                                     ::1 -> localhost  :      0 ms FAST (< 5 sec)
RL:                               127.0.0.1 -> localhost  :      0 ms FAST (< 5 sec)
------------------------------------------------------------------------
Using configured hostname server1
Displaying all locally configured IP addresses
and if these addresses are found in the DNS

Address                                Local         DNS Entry
-------                                -----         ----------
11.5.14.4                             Yes           Yes
11.5.14.2                             Yes           No - private/autoconfigured
11.5.14.1                             Yes           No - private/autoconfigured

No PREFERRED_NETWORK directives.
------------------------------------------------------------------------
Total elapsed time: 0 sec
[root@server1 netbackup]#

bpcd log tail:

23:51:39.826 [834] <2> vnet_pbxAcceptSocket: Accepted sock[11] from 11.5.14.4:35196
23:51:39.826 [834] <2> bpcd main: accept sock = 11
23:51:39.827 [7788] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  0 0x0
23:51:39.827 [7788] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  1 0x1
23:51:39.827 [7788] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  2 0x2
23:51:39.827 [7788] <2> ReadKeyfile: keyfile /usr/openv/netbackup/keyfile does not exist

23:51:39.827 [7788] <2> process_requests: offset to GMT -3600
23:51:39.827 [7788] <2> logconnections: BPCD ACCEPT FROM 11.5.14.4.35196 TO 11.5.14.4.1556 fd = 0
23:51:39.827 [7788] <2> process_requests: setup_sockopts complete
23:51:39.827 [7788] <2> vnet_pcache_init_table: [vnet_private.c:212] starting cache size 200 0xc8
23:51:39.828 [7788] <2> vnet_cached_getnameinfo: [vnet_addrinfo.c:1922] found via getnameinfo OUR_HOST=server1 IPS
TR=11.5.14.4
23:51:39.832 [7788] <2> print_arp_info: server1 (11.5.14.4) -- no entry
23:51:39.832 [7788] <2> bpcd peer_hostname: Connection from host server1 (11.5.14.4) port 35196
23:51:39.832 [7788] <2> bpcd valid_server: comparing server1 and server1
23:51:39.832 [7788] <4> bpcd valid_server: hostname comparison succeeded
23:51:39.832 [7788] <2> process_requests: output socket port number = 1
23:51:39.908 [7788] <2> vnet_receive_network_socket: [vnet_vnetd.c:1084] hash_str1 916af2ca655dda79a517dbc1aebc6c74
23:51:39.908 [7788] <2> vnet_receive_network_socket: [vnet_vnetd.c:1085] hash_str2 e90f593d755c9f65d6e0bc06d7692e7d
23:51:39.908 [7788] <2> verify_hashes: [vnet_vnetd.c:1615] hash_str1 916af2ca655dda79a517dbc1aebc6c74
23:51:39.908 [7788] <2> verify_hashes: [vnet_vnetd.c:1617] hash_str2 e90f593d755c9f65d6e0bc06d7692e7d
23:51:39.908 [7788] <2> verify_hashes: [vnet_vnetd.c:1643] hash_str 916af2ca655dda79a517dbc1aebc6c74
23:51:39.908 [7788] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  7 0x7
23:51:39.908 [7788] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  2 0x2
23:51:39.908 [7788] <2> process_requests: Duplicated vnetd socket on stderr
23:51:39.908 [7788] <2> process_requests: <---- NetBackup 7.6 0 ------------initiated
23:51:39.908 [7788] <2> process_requests: VERBOSE = 5
23:51:39.908 [7788] <2> process_requests: Not using VxSS authentication with server1
23:51:39.947 [7788] <2> process_requests: BPCD_GET_VERSION_RQST
23:51:39.947 [7788] <2> process_requests: BPCD_WANT_STATUSMSGS_RQST
23:51:39.947 [7788] <2> process_requests: BPCD_IMMED_CMD_RQST
23:51:39.947 [7788] <2> process_requests: immed cmd = /usr/openv/netbackup/bin/bptm -delete_all_expired 1>/dev/null 2
>/dev/null
23:51:39.947 [7788] <2> sanitary_mb_str: detected /dev/null after redirection
23:51:39.948 [7788] <2> sanitary_mb_str: detected /dev/null after redirection
23:51:39.948 [7788] <2> sanitary_mb_str: String "/usr/openv/netbackup/bin/bptm -delete_all_expired 1>/dev/null 2>/dev
/null" is considered sanitary.
23:51:40.091 [7788] <2> process_requests: completed command
23:51:40.091 [7788] <2> process_requests: immed cmd status = 0x0
23:51:40.091 [7788] <2> process_requests: immed cmd status = 0
23:51:40.091 [7788] <2> process_requests: BPCD_DISCONNECT_RQST
23:51:40.091 [7788] <2> bpcd exit_bpcd: exit status 0  ----------->exiting
23:51:40.092 [834] <2> daemon_check_for_zombies: waited for 1 child processes including: 7788
23:51:42.875 [834] <2> vnet_pbxAcceptSocket: Accepted sock[11] from 11.5.14.4:38106
23:51:42.875 [834] <2> bpcd main: accept sock = 11
23:51:42.876 [7795] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  0 0x0
23:51:42.876 [7795] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  1 0x1
23:51:42.876 [7795] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  2 0x2
23:51:42.876 [7795] <2> ReadKeyfile: keyfile /usr/openv/netbackup/keyfile does not exist

23:51:42.876 [7795] <2> process_requests: offset to GMT -3600
23:51:42.876 [7795] <2> logconnections: BPCD ACCEPT FROM 11.5.14.4.38106 TO 11.5.14.4.1556 fd = 0
23:51:42.876 [7795] <2> process_requests: setup_sockopts complete
23:51:42.876 [7795] <2> vnet_pcache_init_table: [vnet_private.c:212] starting cache size 200 0xc8
23:51:42.877 [7795] <2> vnet_cached_getnameinfo: [vnet_addrinfo.c:1922] found via getnameinfo OUR_HOST=server1 IPS
TR=11.5.14.4
23:51:42.880 [7795] <2> print_arp_info: server1 (11.5.14.4) -- no entry
23:51:42.881 [7795] <2> bpcd peer_hostname: Connection from host server1 (11.5.14.4) port 38106
23:51:42.881 [7795] <2> bpcd valid_server: comparing server1 and server1
23:51:42.881 [7795] <4> bpcd valid_server: hostname comparison succeeded
23:51:42.881 [7795] <2> process_requests: output socket port number = 1
23:51:42.957 [7795] <2> vnet_receive_network_socket: [vnet_vnetd.c:1084] hash_str1 34bbd34f314ba871b4ff8180ce2759ee
23:51:42.957 [7795] <2> vnet_receive_network_socket: [vnet_vnetd.c:1085] hash_str2 0d2a625d74b1ff3ad41fff47144b8d80
23:51:42.957 [7795] <2> verify_hashes: [vnet_vnetd.c:1615] hash_str1 34bbd34f314ba871b4ff8180ce2759ee
23:51:42.957 [7795] <2> verify_hashes: [vnet_vnetd.c:1617] hash_str2 0d2a625d74b1ff3ad41fff47144b8d80
23:51:42.957 [7795] <2> verify_hashes: [vnet_vnetd.c:1643] hash_str 34bbd34f314ba871b4ff8180ce2759ee
23:51:42.957 [7795] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  7 0x7
23:51:42.957 [7795] <2> vnet_check_resilient_socket: [vnet_nbrntd.c:806] the socket is  2 0x2
23:51:42.957 [7795] <2> process_requests: Duplicated vnetd socket on stderr
23:51:42.957 [7795] <2> process_requests: <---- NetBackup 7.6 0 ------------initiated
23:51:42.957 [7795] <2> process_requests: VERBOSE = 5
23:51:42.957 [7795] <2> process_requests: Not using VxSS authentication with server1
23:51:42.996 [7795] <2> process_requests: BPCD_GET_VERSION_RQST
23:51:42.996 [7795] <2> process_requests: BPCD_WANT_STATUSMSGS_RQST
23:51:42.998 [7795] <2> process_requests: BPCD_FORK_CMD_RQST
23:51:42.999 [7795] <2> process_requests: fork cmd = /usr/openv/netbackup/bin/bptm bptm -rptdrv -jobid -1428352904 -j
m
23:51:42.999 [7795] <2> process_requests: filter type = -1
23:51:42.999 [7795] <2> process_requests: backuptime before fork = 0
23:51:42.999 [7795] <2> bpcd exit_bpcd: exit status 0  ----------->exiting
23:51:42.999 [7799] <2> process_requests: Converting args string into an argv
23:51:42.999 [7799] <2> process_requests: Done converting args string into an argv
23:51:42.999 [7799] <2> process_requests: child_args[0] = /usr/openv/netbackup/bin/bptm
23:51:42.999 [7799] <2> process_requests: child_args[1] = bptm
23:51:42.999 [7799] <2> process_requests: child_args[2] = -rptdrv
23:51:42.999 [7799] <2> process_requests: child_args[3] = -jobid
23:51:42.999 [7799] <2> process_requests: child_args[4] = -1428352904
23:51:42.999 [7799] <2> process_requests: child_args[5] = -jm
23:51:42.999 [7799] <2> process_requests: Before execvp of command
23:51:43.000 [834] <2> daemon_check_for_zombies: waited for 1 child processes including: 7795
[root@server1 bpcd]#

Also,  bpclntcmd -clear_host_cache tried but did not work.

Please can you help me?

thank you in advance!

Hi All,

Currently i have a client thats run DFSR service with total data size ~2TB. The current policy is set to backup the root folder of DFSR which is taking ~3.5 days. Therefore, i have created a new policy (duplicate of existing policy) and in the backup selection list, i have added DFS shares individually to enable the multi-stream. However, when i run the backup, only 3/4 folders is succesffull and the rest ended with error "71 - none of the files in the file list exist"

Could someone advice me if i have missed anything?

Existing Policy - Backup List:

Shadow Copy Components:\User Data\Distributed File System Replication\DfsrReplicatedFolders

New Policy - Backup List:

Shadow Copy Components:\User Data\Distributed File System Replication\DfsrReplicatedFolders\Folder A
Shadow Copy Components:\User Data\Distributed File System Replication\DfsrReplicatedFolders\Folder B

.....

Shadow Copy Components:\User Data\Distributed File System Replication\DfsrReplicatedFolders\Folder Z

Hi,

If I'll be adding Quantum Scalar i500 Tape Library, I just need to use the Device Configuration Wizard, right?

Can you include some best practices?

Thanks!