In our environment we have failed backup restarting by itself. Could anyone guide me on how to enable/disable the auto-restart feauture ? A doc would do.
Auto Restart backup failure in Netbackup
Backup CCTV video images
Hi there,
is it possible to use NBU to backup CCTV Video Images (estimated 10PB) with a retention policy of a year?
Thanks for your prompt answer.
Alex
Cannot open Netbackup Administration Console
Someone please help?
New_Backup Selection...for Windows Server 2012 R2
Good day folks,
I am running NetBackup 7.5.0.4 on Windows 2008 Enterprise. I just built a new archive server on Windows 2012 R2, and when I try to create a "New Backup Selection" on my "Daily-Data" backup policy, the directive set only shows 2003 and 2008 - I am thinking this can only be done for 2003 and 2008 servers. What I would like to know is how can I get to backup my archive server which is running Windows 2012 R2 on NetBackup?
Many thanks in advance for your responses.
Onesimus
Understanding Email notication
I am struggling to understand the Email notication in netbackup. It seems there are at least 3 places in the NBU GUI, NetBackup Management section:
1. Host Properties > Master Server > Server_hostname > Global Attributes > Administrator’s email 2. Host Properties > Master Server > Server_hostname > Universal Settings > Client administrator’s email 3. Host Properties > Clients > Client_hostname > Universal Settings > Client administrator’s email
Suppose I have servers administered by the following teams:
NBU Master: Adminstrator: TEAM NBU
hostX: Adminstrator: TEAM App A
hostY: Adminstrator: TEAM App B
hostZ: Adminstrator: TEAM App B
So as I understand I could use:
email method 1 (Master Server Global Attributes) as "TEAM NBU" so that TEAM NBU gets Email notications for all backups
email method 3 (Clients Universal Settings) as "TEAM A" for client hostX and "TEAM B" for clients hostY and hostZ, so that TEAM A/B only get emails for the hosts they administer
So my questions are:
- Is my above understanding correct
- What do I use email Method 2 for and how is it different from Method 1
- In the manual it says Method 1 and 2 only send emails for unsuccessful backups and Method 3 sends emails for ALL backups - is this correct and if so why is there this difference and why is it not apparent in GUI (i.e there is nothing in GUI that signifies that the exit code of the backup has any bearing on whether email are sent out or not)
Thanks
Mike
Recommended Settings for Linux Master/Media Servers
Is there is a list of recommended config settings for the RedHat Linux OS when running as a master or media server? Kind of a vague question I know but I am curious about settings like these ones below...
cat /proc/sys/net/ipv4/tcp_keepalive_time
7200
cat /proc/sys/net/ipv4/tcp_keepalive_intvl
75
cat /proc/sys/net/ipv4/tcp_keepalive_probes
9
Currently they are just default settings as this is a new site, but I would like to go ahead and best practice it to avoid any issues.
Thank you!
Backing VM's using NBU with DataDomain
Hello,
Someones knows, or have experience backing up vm's with NBU using Data Domain and DD Boost.
Please share information about it.
Regards.
Error after upgrade to netbackup 7.5
We instaled Netbackup 7.5 on a Windows 2008 server. We got the message " Installation Complete " Whe the box came up to add additional License Keys, we hit Finish, and then got the following msg
The NetBackup Access Controll upgrade failed and must be rune manually
Does this mean that there should probably be another license key that should have been installed ?
NB 7.6.0.1 Client Installation is failing.
Client Windows 2008 R2 Standard 64 bit.
Here is the installation log. ( *** Moved to attachment *** )
Error in log:
05-19-2015,13:16:36 : DEBUG: Error 2738: Could not access VBScript runtime for custom action
05-19-2015,13:16:36 : ERROR: Internal Error 2738.
05-19-2015,13:16:40 : Action ended 13:16:40: setRegistryValues.B2D5B6C9_4698_42F7_AC9D_955789A69556. Return value 3.
Technical Document followed to resolve this issue but still installation is failing.
https://support.symantec.com/en_US/article.TECH57368.html
https://support.symantec.com/en_US/article.TECH69937.html
http://csi-windows.com/blog/all/27-csi-news-general/161-fixing-windows-installer-error-2738
Reference link from Microsoft.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/error-2738-could-not-access-vbscript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a
netbackup lto5 tape stored data capacity
Dear Forum,
I check how much data can be held on a single lto5 tape with netbackup.
I made some backup and now the bpmedialist says that I have backup data on one tape 2323751Megabytes. This is more than the tape 1,5Terra uncompressed data capacity. I have not set at policy attributes the checkbox of compression. Is it possible that in case of backups the lto5 tape compressed capacity 3Terra counts as possible saving ammount? Or the policy type also determine how much data can be kept on a single tape?
Can someone gives me details on this?
Thank you in advance
Regards
Karoly
BMR full backup partially successful.
Hi,
NetBackup master/media/BMR master/boot server 7.6.1.2 OS:redhatlinux65 ( one physical machine )
SRT redhatlinux65
six NetBackup clients 7.6.1.2: redhatlinux6.6 KVM on top of redhatlinux6.5; NetBackup client software was installed on each VM.
one NetBackup client 7.6.1.2: redhatlinux59 KVM on top of redhatlinux6.5; NetBackup client software was installed on VM.
I am doing BMR full backup of my seven clients.
six NetBackup clients: redhatlinux6.6 KVM ---- failed
one NetBackup client: redhatlinux59 KVM -- succeeded
The detailed status is listed below. Can anyone help me on this issue? Thanks in advance!
06/03/2015 15:09:18 - Info nbjm (pid=42111) starting backup job (jobid=794) for client tang1-oam-1, policy Fullbackup-VzW, schedule diff-incr
06/03/2015 15:09:18 - Info nbjm (pid=42111) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=794, request id:{736DB956-09BF-11E5-9E2E-33D52B46E2F2})
06/03/2015 15:09:18 - requesting resource Fullbackup
06/03/2015 15:09:18 - requesting resource ming.NBU_CLIENT.MAXJOBS.tang1-oam-1
06/03/2015 15:09:18 - requesting resource ming.NBU_POLICY.MAXJOBS.Fullbackup-VzW
06/03/2015 15:09:18 - granted resource ming.NBU_CLIENT.MAXJOBS.tang1-oam-1
06/03/2015 15:09:18 - granted resource ming.NBU_POLICY.MAXJOBS.Fullbackup-VzW
06/03/2015 15:09:18 - granted resource MediaID=@aaaac;Path=/var/images/nbk/fullbackup;MediaServer=ming
06/03/2015 15:09:18 - granted resource Fullbackup
06/03/2015 15:09:20 - estimated 959088 kbytes needed
06/03/2015 15:09:20 - begin Parent Job
06/03/2015 15:09:20 - begin Bare Metal Restore: Start Notify Script
06/03/2015 15:09:20 - Info RUNCMD (pid=6664) started
06/03/2015 15:09:20 - Info RUNCMD (pid=6664) exiting with status: 0
Operation Status: 0
06/03/2015 15:09:20 - end Bare Metal Restore: Start Notify Script; elapsed time 0:00:00
06/03/2015 15:09:20 - begin Bare Metal Restore: Bare Metal Restore Save
06/03/2015 15:09:21 - collecting BMR information
06/03/2015 15:09:21 - connecting
06/03/2015 15:09:21 - connected; connect time: 0:00:00
06/03/2015 15:09:21 - transfering BMR information to the master server
06/03/2015 15:09:21 - connecting
06/03/2015 15:09:21 - connected; connect time: 0:00:00
06/03/2015 15:09:21 - started process bpbrm (pid=6670)
06/03/2015 15:09:46 - Error bpbrm (pid=6670) BMRERR: Received BMR error: Failed to import Config file. (27)
06/03/2015 15:09:46 - Error bpbrm (pid=6670) BMRERR: Received BMR error: Unable to parse client information. (6)
06/03/2015 15:09:46 - Error bpbrm (pid=6670) BMRERR: Received BMR error: Failed sending the discovery. (21)
06/03/2015 15:09:46 - Error bpbrm (pid=6670) BMRERR: Received BMR error: BMR information discovery failed. (35)
06/03/2015 15:09:46 - Info bmrsavecfg (pid=0) done. status: 1: the requested operation was partially successful
06/03/2015 15:09:46 - end writing
Operation Status: 1
06/03/2015 15:09:46 - end Bare Metal Restore: Bare Metal Restore Save; elapsed time 0:00:26
06/03/2015 15:09:46 - begin Bare Metal Restore: Policy Execution Manager Preprocessed
Operation Status: 0
06/03/2015 15:11:37 - end Bare Metal Restore: Policy Execution Manager Preprocessed; elapsed time 0:01:51
06/03/2015 15:11:37 - begin Bare Metal Restore: End Notify Script
06/03/2015 15:11:37 - Info RUNCMD (pid=8042) started
06/03/2015 15:11:37 - Info RUNCMD (pid=8042) exiting with status: 0
Operation Status: 0
06/03/2015 15:11:37 - end Bare Metal Restore: End Notify Script; elapsed time 0:00:00
Operation Status: 1
06/03/2015 15:11:37 - end Parent Job; elapsed time 0:02:17
the requested operation was partially successful (1)
Regards,
Lacey
NetBackup 7.5.0.7 Duplication Status 150 and 191
Dear all,
Duplication Status 150 and 191 (Could not get raw segment - no such object. Refer to the replication logs on the source storage server for more information. V-454-105)
We are experiencing duplication status 150 for duplications to from disk to disk and 191 from disk to tape. We believe that the issue occurres due to big workload at the media server at 02:00 am (both backups and duplications jobs are trying to access the disk pool and read/write data). We have procceed at the following tune up's but the issue still occures:
- Maximum I/O streams on the Disk Pool = 60
- Changes to the LIFECYCLE_PARAMETERS file
- Changes the Media server connect timeouts to 60 seconds from 30 which were the default value.
Old LIFECYCLE_PARAMETERS
DUPLICATION_SESSION_INTERVAL_MINUTES = 5
MAX_MINUTES_TIL_FORCE_SMALL_DUPLICATION_JOB = 30
MAX_GB_SIZE_PER_DUPLICATION_JOB = 200
MIN_GB_SIZE_PER_DUPLICATION_JOB = 16
New LIFECYCLE_PARAMETERS
DUPLICATION_SESSION_INTERVAL_MINUTES = 30
MAX_MINUTES_TIL_FORCE_SMALL_DUPLICATION_JOB = 60
MAX_GB_SIZE_PER_DUPLICATION_JOB = 400
MIN_GB_SIZE_PER_DUPLICATION_JOB = 80
The logs when the issue occurs:
Detailed Status from failed duplication:
9 Μαϊ 2015 2:15:35 πμ - Info bpdm (pid=2545) Creating OPT_DUP_END marker
9 Μαϊ 2015 2:23:35 πμ - Critical bpdm (pid=2545) Storage Server Error: (Storage server: PureDisk:bs-kifissos) async_get_job_status: Replication started but failed to complete successfully: __forward_SO: Could not get raw segment a7e4f1f4ff09cf55be3caee38aad60a0, len 16777216: no such object. Refer to the replication logs on the source storage server for more information. V-454-105
9 Μαϊ 2015 2:23:35 πμ - Critical bpdm (pid=2545) sts_copy_extent failed: error 2060014 operation aborted
9 Μαϊ 2015 2:23:42 πμ - Error bpduplicate (pid=19933) host bs-pireos backup id r6-osn6-kif_1431126003 optimized duplication failed, termination requested by administrator (150).
9 Μαϊ 2015 2:23:42 πμ - Info bs-pireos (pid=2545) StorageServer=PureDisk:bs-kifissos; Report=PDDO Stats for (bs-kifissos): scanned: 2 KB, CR sent: 0 KB, CR sent over FC: 0 KB, dedup: 100.0%
9 Μαϊ 2015 2:23:42 πμ - Error bpduplicate (pid=19933) db_IMAGE() failed: Images are in process. Please, run the nbstlutil command to get a list of those images if you need to cancel or expire them. (1519)
9 Μαϊ 2015 2:23:42 πμ - Error bpduplicate (pid=19933) Duplicate of backupid r6-osn6-kif_1431126003 failed, termination requested by administrator (150).
Replication logs on the source storage server (bs-kifissos):
May 09 02:16:31 INFO [140159293536000]: sessionStartAgent: Server is Version 7.0006.0013.112, Protocol Version 6.6.1
May 09 02:16:52 INFO [140159294064384]: sessionStartAgent: Server is Version 7.0006.0013.112, Protocol Version 6.6.1
May 09 02:17:54 ERR [140159294064384]: 2: __forward_SO: couldn't get raw segment ssize a7e4f1f4ff09cf55be3caee38aad60a0 len 16777216
May 09 02:17:54 ERR [140159294064384]: -1: __forward_SO: Could not get raw segment a7e4f1f4ff09cf55be3caee38aad60a0, len 16777216: no such object
May 09 02:17:54 ERR [140159294064384]: 2: __replicate_SOs_of_DO:replication failed so fingerprint a7e4f1f4ff09cf55be3caee38aad60a0 (16777216 bytes)
May 09 02:17:54 ERR [140159294064384]: 2: __process_batch: replication failed batch send failed at DO 5ec160006a8a7722bd5068dc4da99166
May 09 02:17:54 ERR [140159294064384]: 2: CRReplicate: replication failed batch send failed at DO 5ec160006a8a7722bd5068dc4da99166
May 09 02:17:54 ERR [140159294064384]: 2: CRReplicate of batch failed: no such object
May 09 02:17:54 ERR [140159294064384]: 2: forward fingerprints failed: no such object (2)
May 09 02:17:59 INFO [140159294064384]: WSRequestExt: submitting
Thank you in regards.
NBU Cloud
Hi,
Customer can't access Admin Console.
Upgrade: NBU appliance 5220 from 2.6.0.3 to 2.6.0.4
Hi
we are planning to upgrade our NBU appliance 5220 to version 2.6.0.4 from 2.6.0.3.
It is being used as media server and some tape drives are also attached to it.
I have download the patch of 2.6.0.4 on my applaince. It total capacity is 40 TB and used is approx 17 TB.
Please let me know how should I proceed, what are the pre-requisites.
how long this upgrade will take.
LotusNotes Trans/staged backups.
We have a company here helping or Lotus notes admin build a new Lotus notes farm including the domino server, Archiving server etc.
There are all VM servers running server 2012 R2There are 6 drives on this server
I can handle most of this but 3 of the drives
They want Transaction logs backup. which from what I am seeing I can't do this as a VM backup I am going to have to install a agent on the server correct?
Not the next issue is the D, and E drive
They are saying I have to backup D, before E is backup or it will screw everything up. I am not seeing any way of saying backup D and once that is finished back up E.
Is there a way to stage this with out making 2 policys at 2 different times?
Any help would be great I am reading the admin guide for lotus notes backup now.
Netbackup server is
Windows 2008 R2 SP1
Media/master same server
Netbackup 7.5.0.6
Scratch pool in NetBackup Administration 7.5
Hello,
I'm new to the NetBackup, need to clarify how the NetBackup working with DataDomain. The DataStore pools have 1140 virtual virtual tapestapes, Scratch pool have 487 virtual tapes, ToRemove pool have 207 virtual tapes. But DataDomain is struggling over a month over 90% full, and yesterday 98% full. My question is, why it did not pull(used) the tapes from Scratch or ToRemove pool ? Does it need a manual intervention to activate these virtual tapes?
Thank you
Regards,
Thirun
Debian compatibility 8 Netbackup 7.6.0.4
Good day,
Netbackup 7.6.0.4 is compatible with Debian 8???? for VM backup.
I did a test, the backup processed normally, the normal restore backup ok.
The virtual machine restore submitted error (2820).
Multiple Schedules in SQL backup policies
Hi,
We're using NB7.5 writing to Data Domain disk storage and to tape.
We run daily, weekly and monthly backups on live SQL databases. We have a policy for a specific backups, and following the support doc here - https://support.symantec.com/en_US/article.TECH90544.html - I can create schedules with start times so if the job runs on a weekday it writes to Data Domain storage (6 weeks retention) or at the weekend it runs the weekly SLP (writes to Data Domain with 6wks retention then also replicates to a tape with 1 year retention).
But what about our month end backups? They also happen at weekends. Given the current options there is no way to differentiate whether the backup is a weekly or monthly backup, so no way to set the monthly backup to the standard 10 year retention on tape.
Is there a way to specify an application backup schedule when running the job at the command line? (All our jobs are run like that via a 3rd party scheduler).
If not I'll have to create a dedciated month end policy.
change storage unit to replication source
Hi All,
we have 2 netbackup domains (N4, N8) with 1-1 DataDomain attached to it.
I'd like to setup Netbackup AIR between these two domains. is it possible to change the currently used storage units mode to replication source? or do i have to create new storage units?
On datadomain the ddboost assoc. is setup, but netbackup is not accepting the new SLP, saying the STU is not capable to replicate from.
sysadmin@ N4# ddboost association show all Local Storage Unit Direction Remote Host Remote Storage Unit ------------------ ------------ ---------------------------- ------------------- mssql replicate-to N8 mssql_N4 ------------------ ------------ ---------------------------- ------------------- sysadmin@ N8# ddboost association show all Local Storage Unit Direction Remote Host Remote Storage Unit ------------------ -------------- ---------------------------- ------------------- mssql_N4 replicate-from N4 mssql ------------------ -------------- ---------------------------- -------------------
thanks
Gergely
Using DD as VTL related query
Hi all,
I have one question....
In which scenarios we can use DD as VTL. means what is the significance of doing this.
I have one scenario like: if in ur env. BW is less like you have link of only 1Gig in that case u can use DD as VTL.
can someone share other options as well.