Hi Guys,

I'm trying to find an answer to my question and i would have thought that the IBM website would be helpful, but they have more holes in their documentation than Swiss cheese.

We are looking at implementing IBM Orchestrator for automation and would like to know if it could be used to automate the NetBackup software install and adding to a backup policy/schedule for backup protection.

I found one presentation from 2 years ago, where they mention that it is support, but I would just like to get an official document or support matrix where it is stated black on white. Heck, I would even be happy with a troubleshooting document with regards to my proposed setup.

Thanks

Hello Everyone,

While updating linux. clients to 7.6.0.1 from 7.1 , i am getting below error:

Checking for SYMCpddea package...
   Package SYMCpddea found.

NetBackup Deduplication software is installed.

NetBackup Deduplication is not yet configured.

ERROR:   Detected an attempt to install incorrect platform and/or
         operating system and version client binaries on xxxxx.

client_config_failed

INF OTHER - EXIT STATUS = 1
EXIT STATUS = 1

We have below client binaries available on media server:

============================================================

bash-4.1$ ls /usr/openv/netbackup/client/Linux
Debian2.6.18  IBMpSeriesRedHat2.6  IBMpSeriesSuSE2.6  IBMzSeriesRedHat2.6.18  IBMzSeriesSuSE2.6.16  RedHat2.6.18  SuSE2.6.16

bash-4.1$ cd RedHat2.6.18
bash-4.1$ ls
client_bin.tar.gz  cp_to_client  ftp_to_client   installpbx  nbcheck         nbj.conf    pddeagent.tar.gz  sftp_to_client  tar
client_config      extract_java  install_client  JRE.tar.gz  NB-Java.tar.gz  PBX.tar.gz  pdinstall         ssh_to_client   version
bash-4.1$ cat version
NetBackup-RedHat2.6.18 7.6.0.1

=====================================================

i have created a test_update file with below entries.

bash-4.1$ cat /tmp/test_update
Linux   RedHat2.6.18  xxxxx

This is uname o/p of the client

bash-3.00$ uname -a
Linux xxxxx 2.6.9-106.ELsmp #1 SMP Tue Dec 16 11:23:56 EST 2014 x86_64 x86_64 x86_64 GNU/Linux

==============================================================================

Please let me know how can i proceed fot the update

Hello,

I just upgraded a NBU Platform from 7.5 to 7.6.1.2.

The PDDE_convert.bat failed with the following error :

[2015-07-22 14:51:57][ERR] E:\MSDP\databases\catalog-tmp\2\s-sirius.ges.aer.intra\SAP\s-sirius.ges.aer.intra_1435780835_C1_F1.hdr: Failed to begin transaction (unknown error)

[2015-07-22 14:51:57][ERR] Failed to upgrade catalog (unknown error)

The .hdr file is not present in the directory !

How can I correct the situation ?

Hi All,

Then replication jobs between prod site and the DR site is failed with error 174 .I checked the configuration all seems to be fine .

AT production site the replication jobs are created but at DR  , no import jobs are refelecting .

Previously it was working but since last week the Netbackup env. has this issue.

At Prod :

Master server : V 7.6.0.4 (Linux)

Media server : 2 x Netbackup Appliance  5230 (2.6.0.4)

At DR :

Master server : V 7.6.0.4 (Linux)

Media server : 2 x Netbackup Appliance  5230 (2.6.0.4)

Error in Job Details :

20/07/2015 10:35:21 - Info bpdm(pid=49089) started            
20/07/2015 10:35:21 - started process bpdm (49089)
20/07/2015 10:38:11 - Info lappsnbua01(pid=49089) Using OpenStorage to replicate backup id LAPPWSDCPDB01_1437247536, media id @aaaai, storage server lappsnbua02, disk volume PureDiskVolume
20/07/2015 10:38:11 - Info lappsnbua01(pid=49089) Replicating images to target storage server scopsnbua01, disk volume PureDiskVolume   
20/07/2015 11:21:48 - requesting resource LCM_*Remote*Master*
20/07/2015 11:21:52 - granted resource LCM_*Remote*Master*
20/07/2015 11:21:53 - Info nbreplicate(pid=2364) Suspend window close behavior is not supported for nbreplicate    
20/07/2015 11:21:53 - Info nbreplicate(pid=2364) window close behavior: Continue processing the current image     
20/07/2015 11:21:53 - started process RUNCMD (2364)
20/07/2015 11:22:13 - requesting resource @aaaai
20/07/2015 11:22:13 - reserving resource @aaaai
20/07/2015 11:22:22 - reserved resource @aaaai
20/07/2015 11:22:22 - granted resource MediaID=@aaaai;DiskVolume=PureDiskVolume;DiskPool=dp_lappsnbua02_dedupe;Path=PureDiskVolume;StorageServer=lappsnbua02;MediaServer=lappsnbua01
20/07/2015 12:31:52 - Critical bpdm(pid=49089) Storage Server Error: (Storage server: PureDisk:lappsnbua02) CALaunchAIRReplicate: Failed to complete launchAIRReplicate webservice (Could not setup replication: Load of remote config failed (connection reset by peer) ) V-454-61
20/07/2015 12:31:52 - Error bpdm(pid=49089) <async> copy image failed: error 2060019: error occurred on network socket  
20/07/2015 12:31:52 - Error bpdm(pid=49089) copy failed: error 174         
20/07/2015 12:31:52 - Error bpdm(pid=49089) <async> cancel failed: error 2060001: one or more invalid arguments   
20/07/2015 12:31:52 - Error bpdm(pid=49089) copy cancel failed: error 174        
20/07/2015 12:31:52 - Info lappsnbua01(pid=49089) StorageServer=PureDisk:lappsnbua02; Report=PDDO Stats for (lappsnbua02): scanned: 4 KB, CR sent: 0 KB, CR sent over FC: 0 KB, dedup: 100.0%, cache disabled
20/07/2015 13:18:56 - Error nbreplicate(pid=2364) ReplicationJob::Replicate: Replication failed for backup id LAPPWSDCPDB01_1437247536: media write error (84)  
20/07/2015 13:18:56Replicate failed for backup id LAPPWSDCPDB01_1437247536 with status 84
20/07/2015 13:18:56 - end operation
no images were successfully processed(191)

Hi all,

I'm stuck with a reccurent issue in my day to day work with Netbackup and hope someone would be able to save my day :-)

First my question : when there is a media(tape) request in device monitor for a job, how can I choose the tape ? 

Any hint in GUI or command line will be welcomed 

Below my attempt to explain situation :-) 

I'm working on a Netbackup 7.5.0.6 master server, with a media server using a simple drive in each different Office of the company.

Architecture was made using "Volume Pool" for Daily/Weekly/Monthly, but no setting says in advance to which media server a tape belongs to(to my knowledge).

In remote sites they often insert the tape lately, when the backup job has been waiting for a long time for its tape : in these cases Netbackup already tried another tape in the same "Volume Pool"

Result is, in Netbackup console : 

-> in job monitor, backup is pending, waiting for tape insertion

-> in device monitor, a request is asking for a tape from "random" site, which of course can't be inserted as it is not even in t he same city ;-)

To formulate another way :

There is Sites A B C D E with a media server and dirve in each named mediaSrvA mediaSrvB etc

In our example error will be in physical site A using MediaSrvA

If a tape in correct Volume Pool (ie : daily/weekly/monthly) is not already inserted, after a time there is a media request in device monitor asking for a tape from a random Site : result is something like that :

Device Host : MediaSrvA

Recorded&External media ID : Some_tape_from_another _office

I have right clic options :  

-> Assign Request : no visible change

-> ReSubmit request : no visible change

After a while, if I tried options above, the tape requested changes (but from a random Site), but I don't know wich one does the change

-> Deny Request : this one cancels the backup job 

Here's the restore details

7/22/2015 6:01:04 PM - begin Restore

7/22/2015 6:01:05 PM - Info dbclient(pid=2492) INF - RESTORE STARTED USING       

7/22/2015 6:01:05 PM - Info dbclient(pid=2492) Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (X64)    

7/22/2015 6:01:05 PM - Info dbclient(pid=2492) Mar 29 2009 10:11:52        

7/22/2015 6:01:05 PM - Info dbclient(pid=2492) Copyright (c) 1988-2008 Microsoft Corporation       

7/22/2015 6:01:05 PM - Info dbclient(pid=2492) Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)

7/22/2015 6:01:05 PM - Info dbclient(pid=2492) Batch = C:\Program Files\Veritas\NetBackup\DbExt\MsSql\XXXXXXXXXX.bch, Op# = 1.     

7/22/2015 6:01:05 PM - Info dbclient(pid=2492) INF - Using backup image XXXXXXXXXXDB.~.7.001of001.20150720080013..C      

7/22/2015 6:01:06 PM - Info dbclient(pid=2492) INF - restore database "XXXXXXXXXX" from VIRTUAL_DEVICE='VNBU0-2492-6708-1437559265' with  stats = 10, blocksize = 65536, maxtransfersize = 4194304, buffercount = 2, replace , norecovery, move 'XXXXXXXXXXTest' to 'Z:\XXXXXXXXXX_0722.mdf', move 'XXXXXXXXXXTest_log' to 'Z:\XXXXXXXXXX_0722.ldf', replace

7/22/2015 6:01:06 PM - Info dbclient(pid=2492) INF - Number of stripes: 1, Number of buffers per stripe 2.

7/22/2015 6:01:06 PM - Info dbclient(pid=2492) INF - Created VDI object for SQL Server instance <XXXXXXXXXX>. Connection timeout is <300> seconds.

7/22/2015 6:01:25 PM - Info dbclient(pid=2492) ERR - Error in GetCommand: 0x80770004.      

7/22/2015 6:01:25 PM - Info dbclient(pid=2492)     CONTINUATION: - An abort request is preventing anything except termination actions.

7/22/2015 6:01:26 PM - Info dbclient(pid=2492) INF - OPERATION #1 of batch C:\Program Files\Veritas\NetBackup\DbExt\MsSql\XXXXXXXXXX_restore_0722_9AM_final_2.bch FAILED with STATUS 1 (0 is normal). Elapsed time = 22(22) seconds.

7/22/2015 6:01:28 PM - Info dbclient(pid=2492) INF - Results of executing <C:\Program Files\Veritas\NetBackup\DbExt\MsSqlXXXXXXXXXXdb_restore_0722_9AM_final_2.bch>:     

7/22/2015 6:01:28 PM - Info dbclient(pid=2492) <0> operations succeeded. <1> operations failed.       

I have question, we have another backup job completed with status 1 , Error message:

07/22/2015 05:37:19 - Error bpbrm (pid=28113) from client ghdspwfe3wpl: ERR - failure reading file: D:\Logs\SP\GHDSPWFE3WPL-20150722-0818.log (WIN32 13: The data is invalid. )

I found the suggestion in Symantec support website https://support.symantec.com/en_US/article.TECH143... , it says : This issue is rooted in how the non NTFS file system returns stream data when responding to the backup API NetBackup uses by default (NTIO).

To disable NTIO (which is enabled by default), a registry key and value must be created as follows:
1. Run regedit
2. Create the following key:
HKEY_LOCAL_MACHINE\Software\VERITAS\NetBackup\CurrentVersion\Config\NTIO
3. Under this key, create a DWORD value named "UseNTIO"
4. Give this a value of "0". A value of 0 disables NTIO

NOTE: NetBackup 7.5 will create the UseNTIO registry key (set to '0') by default during installation on Windows, thereby disabling the use of NTIO by default.

But client server ( window 2012) is running on 7.5.0.6, should we disable NTIO ? Thank you.

Having a heck of a time trying to figure this out. 14 of my 21 VMware policies are failing with a status code 200 for some reason. Credentials are good and we can do a test query with no issues.

Windows 2012 VMware Backup Host

5.5 Update 2

7.6.0.2 and I verified the VDDK is 5.5.0

I have attached all of the logs that would actually run. I cranked VXMS up to 5, but no log was created as I am guessing it just doesnt get that far into the process.

Detailed Job Status:

07/22/2015 11:00:59 - Info nbjm (pid=1310) starting backup job (jobid=3391315) for client MEDIA_SERVER, policy Omaha_VMware_INFOBLOX, schedule Full_Daily
07/22/2015 11:00:59 - Info nbjm (pid=1310) requesting MEDIA_SERVER_ONLY resources from RB for backup job (jobid=3391315, request id:{D84F647C-308A-11E5-9F49-002128A6F97C})
07/22/2015 11:00:59 - requesting resource XP53TAPE009
07/22/2015 11:00:59 - requesting resource xp53tape001.NBU_POLICY.MAXJOBS.Omaha_VMware_INFOBLOX
07/22/2015 11:00:59 - granted resource  xp53tape001.NBU_POLICY.MAXJOBS.Omaha_VMware_INFOBLOX
07/22/2015 11:00:59 - estimated 11832060 kbytes needed
07/22/2015 11:00:59 - begin Parent Job
07/22/2015 11:00:59 - begin Application Resolver: Start Notify Script
07/22/2015 11:01:00 - Info RUNCMD (pid=15674) started
07/22/2015 11:01:00 - Info RUNCMD (pid=15674) exiting with status: 0
Operation Status: 0
07/22/2015 11:01:00 - end Application Resolver: Start Notify Script; elapsed time 0:00:01
07/22/2015 11:01:00 - begin Application Resolver: Step By Condition
Operation Status: 0
07/22/2015 11:01:00 - end Application Resolver: Step By Condition; elapsed time 0:00:00
07/22/2015 11:01:00 - begin Application Resolver: Resolver Discovery
Operation Status: 0
07/22/2015 12:31:04 - end Application Resolver: Resolver Discovery; elapsed time 1:30:04
07/22/2015 12:31:04 - begin Application Resolver: Policy Execution Manager Preprocessed
07/22/2015 12:31:04 - Warning nbpem (pid=1367) VM retrieval failed, server = [53apps178vm].
Operation Status: 200
07/22/2015 12:31:04 - end Application Resolver: Policy Execution Manager Preprocessed; elapsed time 0:00:00
07/22/2015 12:31:04 - begin Application Resolver: Stop On Error
Operation Status: 0
07/22/2015 12:31:04 - end Application Resolver: Stop On Error; elapsed time 0:00:00
07/22/2015 12:31:04 - begin Application Resolver: End Notify Script
07/22/2015 12:31:04 - Info RUNCMD (pid=27555) started
07/22/2015 12:31:04 - Info RUNCMD (pid=27555) exiting with status: 0
Operation Status: 0
07/22/2015 12:31:04 - end Application Resolver: End Notify Script; elapsed time 0:00:00
Operation Status: 200
07/22/2015 12:31:04 - end Parent Job; elapsed time 1:30:05
scheduler found no backups due to run  (200)

Hello all,

I have some problem with duplication from a DataDomain to another DataDomain. The duplication sometimes work fine and sometimes no, but in both case I have a weird message in the Job Details:

07/23/2015 10:44:32 - Info bpduplicate (pid=14220) Suspend window close behavior is not supported for optimized duplications
07/23/2015 10:44:32 - Info bpduplicate (pid=14220) window close behavior: Continue processing the current image

I attacched one job ended fine and one bed. I also tried a manual duplication and in this case the message not compare and work all fine.

Please I ask you, which logs I can look as help ?

below some information:

Master server: OS Linux Red Hat Enterprise Linux Server release 5.8 (Tikanga); NBU 7.6.0.3; Plugin DDboost Vendor Version: 3.0.1.0-451885;

Media Server: OS Win Server 2008 R2 Standard; NBU 7.6.0.3; Plugin DDboost Vendor Version: 2.6.1.0 (I will update with last version but I don't think that it is the cause of issue).

Tx !!!

We currently are backing up our sql servers using Netbackup, however netbackup is utilizing a ton of bandwidth to perform the backups.  We have a project in place to rectify this at the server level, however in the interim, is there any way to limit the amount of bandwidth utilized by Netbackup when connecting to SQL Server?

I've read some tech notes on using a LIMIT_BANDWIDTH setting, however it stated it wouldn't apply for SQL backups.  Is there any setting, whether in the backup batch file, client, etc. which would throttle the bandwidth utilized during backups of SQL server?

Thanks

I've been asked to restore an SAP DB (server has version 7.5.0.6) to a client which has a version level of 7.5.0.4.

Any issues or bugs that I should be aware of?

7/23/2015 4:12:49 PM - granted resource MediaID=@aaaaC;DiskVolume=eagan;DiskPool=eagan-dp;Path=eagan;StorageServer=Datadomain;MediaServer= 7/23/2015 4:12:52 PM - Info bpbrm(pid=4156) is the host to restore to 7/23/2015 4:12:52 PM - Info bpbrm(pid=4156) reading file list for client 7/23/2015 4:12:53 PM - Error bpbrm(pid=4156) Couldn't open /usr/openv/netbackup/.rename.4156 on client , status: 2 7/23/2015 4:12:54 PM - Error bpbrm(pid=4156) cannot put rename file on 7/23/2015 4:12:54 PM - Info tar32(pid=0) done. status: 12: file open failed 7/23/2015 4:12:54 PM - Error bpbrm(pid=4156) client restore EXIT STATUS 12: file open failed

I have looked around, but still can't seem to find a definitive answer for my question. What I am trying to figure out is the behaviour of a client-side dedupe operation during the initial backup without any seeding. If the selection to backup consists of 1,024 identical 1MB files (1GB data total), does the intial backup still send all 1,024 of those to the central MSDP storage? Or does the plugin recognize that there are identical fingerprints within the dataset to be backed up (even without a fingerprint cache to compare to)? Thanks for any help, this is more for knowledge than practical purposes since I am using the seeding method anyway.

Hello Experts,

Please help us with answers to below queries :-

1)    We have Ops-center server (NBU ver.7.6.0.1) in PROD environment in which we have also integrated our Test_Environment Master Backup Server also, along with PROD Master Backup server. Since we are upgrading our Test_Environment Master Backup server only at this time and not PROD, so do we need to remove Test_Environment Master Backup Server completely from Ops-Center before proceeding with the upgrade or just disabling data collection for the same will help us.  The sequence of upgrading any NBU environment requires that we upgrade Ops Center first of all, hence this question. Please suggest in detail.

2)    No Backup/restore/duplication should happen while the upgrade is in progress. But do we need to suspend NBPEM only before proceeding with upgrade or need to shut down NBU services completely before doing that ?

3)    How can we make sure we would be able to push clients software from our Test_Environment Master Backup once it gets upgraded to NBU 7.6.1.2.

4)    Do we need to install 7.6.1 and then 7.6.1.2 , both client binaries and plugin binaries on VMware proxy backup host (VM machine used as proxy host for VMware snapshot backup) ?

5)    Do we need to keep license keys handy too ? Do upgrade from 7.6.0.1 to 7.6.1 and then 7.6.1.2 requires license keys to be entered during the process ? is it being asked for during upgrade ?

6)    What would be the Roll Back plan if in case it would be required ? How do we revert back to previous version and NBU settings ? A previous ver NBU 7.6.0.1 re-install, followed by Catalog restore ?

7) Attached screenshot are the binaries that we have downloaded for 7.6.1 and then 7.6.1.2 upgrade, could you please guide us in which sequence we should start applying these binaries in our environment during start-to-finish upgrade process please ?
We won’t be using Ops-center binaries for now as we are not upgrading Ops-Center at this time.

Our Test environment is :-

1)    1 Windows 2008 R2 64 bit Enterprise Master backup server.
2)    1 Solaris 11.1 LDOM Media Server.
3)    1 VMware proxy backup host for VMware snapshot backup of all Windows/Linux VMware machine.
4)    Oracle SL48 Library with 2 LTO4 tape drives, dynamically shared between both master and media server.
5)    33 Solaris 11.1 LDOM clients in Standard policies.
6)    30 VMware machines (Windows+Linux) in VMware snapshot backup policy.

Please see attached if all essential binaries have been downloaded or are there any still left to be able to finish up-gradation to our above test environment.

I know there are lots of document available online, but getting into more documenation makes me really confusing, so just looking for point-to-point answers here please.

Awaiting for a positive response.

Can someone tell me how to get a report out of OpsCenter 7.6.0.4 that will show me how many tapes are frozen per day over a 3 month period?

Hi,

Issue: 1) SLP duplication jobs cancelled.   (2) How to assign Same media server another pure disk.

Currently our SLP (Duplication) jobs schedule Saturday Night to Monday Morning, but during this period SLP replication not completed.

So I have tried to change the SLP schedule every day night (8:00PM to 4:00AM)   (Asume that running SLP jobs will suspend and same will continue after that).

After changes pending/running SLP jobs are cancelled not suspended.

Our Setup:

All is Pure disk storage.

We are not using any Tape drive.

Offsite also storage disk.

Network bandwidth is low, so try to schedue in every night.

Windows 2008 R2 (Master server)

Windows 2008 (Media Server)

One Media server 15TB space allocated (Pure disk) now 5TB another disk partition is free (not in used)

As per symantec document:

NetBackup 7.6 Administrator's Guide I found the reason why the SLP cancels instead of suspend the image when the backup window closes.

As we are not using storage units of type “AdvancedDisk” or “Media Manager”, but “PureDisk”, the SLP cannot suspend the image and will proceed with one of the options we can select in “window closure preference”:

Please suggest...

1) How configure the replication SLP for every night.

2) How allocate another remaining disk (5TB) via Pure disk (It's not allowed).

Regards,

Atharava

Hi All,

Customer has a critical application configured on IBM P Series Platform. Support matrix does not support this platform i.e. Linux on IBM Power PC.

None of the NetBackup version even to the latest one are getting installed giving error incorrect platform.

uname -a
Linux Hostname 3.10.0-229.ael7b.ppc64le #1 SMP Fri Jan 30 12:03:50 EST 2015 ppc64le ppc64le ppc64le GNU/Linux

cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.1 (Maipo)

Not sure why IBM and Symantec have not worked together to support P series Platform.

Is there any roadmap or future for this support.

Is there any workaround to install the client on this platform.

Found few technotes but not sure it will help.

https://support.symantec.com/en_US/article.TECH184...

https://support.symantec.com/en_US/article.TECH176...

Support matrix.

http://origin-symwisedownload.symantec.com/resourc...

TIA.

Hi, all!

2 client servers on Solaris 11 SPARC fails backup with status code 6

Harware-2 same M5000 servers.

NB server version- 7.6.0.4

NB Clients version-7.5

Backups shedulled every 2 hours(via Oracle RMAN)

Not new policies,workin well for a long time.

Not every backup fails, just few in a day.

Activity Monitor shows messages like that:

24.07.2015 5:03:38 - mounted; mount time: 0:00:46
24.07.2015 5:03:46 - positioning 000080 to file 1819
24.07.2015 5:05:19 - positioned 000080; position time: 0:01:33
24.07.2015 5:05:19 - begin writing
24.07.2015 5:05:25 - Info dbclient(pid=948) dbclient(pid=948) wrote first buffer(size=262144)         
24.07.2015 5:05:28 - Info dbclient(pid=948) done. status: 6          
24.07.2015 5:05:28 - Info bptm(pid=8068) waited for full buffer 91 times, delayed 533 times    
24.07.2015 5:05:34 - Info bptm(pid=8068) EXITING with status 0 <----------        
24.07.2015 5:05:34 - Info dbclient(pid=948) done. status: 6: the backup failed to back up the requested files 
24.07.2015 5:05:34 - end writing; write time: 0:00:15
the backup failed to back up the requested files(6)

In log files of master server (Windows) apperas next:

status: RETRY, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO kzsbpm2rdbms.eub.kz 172.20.8.38 bpcd VIA pbx
 status: RETRY, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO kzsbpm2rdbms.eub.kz 172.20.8.39 bpcd VIA pbx

In log files of client machine:

RMAN log:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_SBT_TAPE_1 channel at 07/24/2015 05:05:42
ORA-19501: read error on file "/archive/BPM/SOA7/autobackup/control_autobackupc-2229199251-20150723-0f", block number 1024 (block size=16384)
ORA-27063: number of bytes read/written is incorrect
SVR4 Error: 13: Permission denied
Additional information: -1
Additional information: 1048576
ORA-19600: input file is backup piece  (/archive/BPM/SOA7/autobackup/control_autobackupc-2229199251-20150723-0f)
ORA-19601: output file is backup piece  (c-2229199251-20150723-0f)

dbclient log:
05:05:25.535 [948] <2> int_WriteData: INF - writing buffer # 1 of size 262144
05:05:28.570 [948] <2> int_CloseImage: INF - Backup - closing <c-2229199251-20150723-0f>
05:05:28.570 [948] <8> close_image: Session being terminated abnormally, cleaning up
05:05:28.579 [948] <4> close_image: INF - backup FAILED
05:05:28.579 [948] <4> close_image: INF ---- end of Backup ---

user_ops/dbext/logs log:
04:55:38 INF - Waiting in NetBackup scheduler work queue on server kzwnb01.eub.kz
04:57:38 INF - Waiting in NetBackup scheduler work queue on server kzwnb01.eub.kz
04:59:38 INF - Waiting in NetBackup scheduler work queue on server kzwnb01.eub.kz
05:01:38 INF - Waiting in NetBackup scheduler work queue on server kzwnb01.eub.kz
05:02:29 INF - Starting bpbrm
05:02:47 INF - Data socket = kzwnb01.eub.kz.IPC:/tmp/vnet-01425437692559685605000006446-ffaiYc;7ee8d250ca8307de5b76d909180c150e;11;300
05:02:47 INF - Name socket = kzwnb01.eub.kz.IPC:/tmp/vnet-01430437692562206136000006446-ESaWYc;107997bc48797bd5f1876a1b7a2d8270;11;300
05:02:47 INF - Job id = 179159
05:02:48 INF - Backup id = kzsbpm1rdbms.eub.kz_1437692544
05:02:48 INF - Backup time = 1437692544
05:02:48 INF - Policy name = KZSBPM1RDBMS_SOA7_RMAN
05:02:48 INF - Snapshot = 0
05:02:48 INF - Frozen image = 0
05:02:49 INF - Backup copy = 0
05:02:49 INF - Master server = kzwnb01.eub.kz
05:02:49 INF - Media server = kzwnb01.eub.kz
05:02:49 INF - Multiplexing = 0
05:02:49 INF - New data socket = kzwnb01.eub.kz.IPC:/tmp/vnet-01424437692557164040000006446-SDaaYc;6846e5a4cadd26981d27ac6154991e62;11;300
05:02:50 INF - Encrypt = 0
05:02:50 INF - Use shared memory = 0
05:02:50 INF - Compression = 0
05:02:51 INF - Encrypt = 0
05:02:51 INF - Keep logs = 28
05:02:51 INF - Client read timeout = 300
05:02:51 INF - Media mount timeout = 0
05:02:53 INF - Waiting for mount of media id 000080 on server kzwnb01.eub.kz for writing
05:03:43 INF - Mounted media id 000080
05:05:25 INF - Beginning backup on server kzwnb01.eub.kz of client kzsbpm1rdbms.eub.kz
05:05:35 INF - Server status = 6
05:05:40 INF - Backup by oracle on client kzsbpm1rdbms.eub.kz using policy KZSBPM1RDBMS_SOA7_RMAN, sched Default-Application-Backup:the backup failed to back up the requested files

vnetd log:
05:05:22.356 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:22.356 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:22.358 [1470] <8> ProcessRequests: [vnetd.c:635] msg VNETD ACCEPT FROM 172.20.2.42.63918 TO 172.20.8.49.13724 fd = 8
05:05:22.370 [1470] <8> vnet_version_accept: [vnetd.c:1092] *actual_version 11 0xb
05:05:22.372 [1470] <8> ProcessRequests: [vnetd.c:731] msg Request VN_REQUEST_PBX_C_SUPPORTED(13)
05:05:22.372 [1470] <8> ProcessRequests: [vnetd.c:733] status 0 0x0
05:05:22.591 [1470] <8> ProcessRequests: [vnetd.c:697] msg Request VN_REQUEST_SERVICE_SOCKET(6)
05:05:22.718 [1470] <8> process_service_socket: [vnetd.c:1497] service_name bpcd
05:05:22.719 [1470] <8> vnet_send_network_socket: [vnet_vnetd.c:1400] hash_str2 
05:05:22.719 [1470] <8> ProcessRequests: [vnetd.c:699] status 0 0x0
05:05:22.724 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:22.724 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:23.842 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:23.843 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:23.844 [1473] <8> ProcessRequests: [vnetd.c:635] msg VNETD ACCEPT FROM 172.20.2.42.63920 TO 172.20.8.49.13724 fd = 8
05:05:23.854 [1473] <8> vnet_version_accept: [vnetd.c:1092] *actual_version 11 0xb
05:05:23.862 [1473] <8> ProcessRequests: [vnetd.c:731] msg Request VN_REQUEST_PBX_C_SUPPORTED(13)
05:05:23.862 [1473] <8> ProcessRequests: [vnetd.c:733] status 0 0x0
05:05:24.075 [1473] <8> ProcessRequests: [vnetd.c:718] msg Request VN_REQUEST_CONNECT_FORWARD_SOCKET(10)
05:05:24.076 [1473] <8> vnet_generate_hashes: [vnet_vnetd.c:1592] hash_str1 47afb446cb50b944a7bd47e8f0ac3b68
05:05:24.076 [1473] <8> vnet_generate_hashes: [vnet_vnetd.c:1593] hash_str2 866ca61b4e2969fc0acf4c0f9ae37423
05:05:24.076 [1473] <8> process_connect_forward_socket: [vnetd.c:1972] ipc_string /tmp/vnet-01473437692724075945000006446-Rnai4c
05:05:24.406 [1473] <8> vnet_send_network_socket: [vnet_vnetd.c:1400] hash_str2 866ca61b4e2969fc0acf4c0f9ae37423
05:05:24.407 [1473] <8> ProcessRequests: [vnetd.c:720] status 0 0x0
05:05:24.411 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:24.411 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:37.955 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:37.956 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:37.957 [1477] <8> ProcessRequests: [vnetd.c:635] msg VNETD ACCEPT FROM 172.20.2.42.63967 TO 172.20.8.49.13724 fd = 8
05:05:37.960 [1477] <8> vnet_version_accept: [vnetd.c:1092] *actual_version 11 0xb
05:05:37.962 [1477] <8> ProcessRequests: [vnetd.c:731] msg Request VN_REQUEST_PBX_C_SUPPORTED(13)
05:05:37.962 [1477] <8> ProcessRequests: [vnetd.c:733] status 0 0x0
05:05:37.971 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:37.971 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:37.972 [1478] <8> ProcessRequests: [vnetd.c:635] msg VNETD ACCEPT FROM 172.20.2.42.63968 TO 172.20.8.49.13724 fd = 8
05:05:37.988 [1478] <8> vnet_version_accept: [vnetd.c:1092] *actual_version 11 0xb
05:05:37.999 [1478] <8> ProcessRequests: [vnetd.c:731] msg Request VN_REQUEST_PBX_C_SUPPORTED(13)
05:05:37.999 [1478] <8> ProcessRequests: [vnetd.c:733] status 0 0x0
05:05:38.180 [1477] <8> ProcessRequests: [vnetd.c:697] msg Request VN_REQUEST_SERVICE_SOCKET(6)
05:05:38.209 [1478] <8> ProcessRequests: [vnetd.c:697] msg Request VN_REQUEST_SERVICE_SOCKET(6)
05:05:38.300 [1477] <8> process_service_socket: [vnetd.c:1497] service_name bpcd
05:05:38.301 [1477] <8> vnet_send_network_socket: [vnet_vnetd.c:1400] hash_str2 
05:05:38.301 [1477] <8> ProcessRequests: [vnetd.c:699] status 0 0x0
05:05:38.306 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:38.306 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:38.331 [1478] <8> process_service_socket: [vnetd.c:1497] service_name bpcd
05:05:38.332 [1478] <8> vnet_send_network_socket: [vnet_vnetd.c:1400] hash_str2 
05:05:38.333 [1478] <8> ProcessRequests: [vnetd.c:699] status 0 0x0
05:05:38.337 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:38.337 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:39.347 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:39.347 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:39.348 [1481] <8> ProcessRequests: [vnetd.c:635] msg VNETD ACCEPT FROM 172.20.2.42.63971 TO 172.20.8.49.13724 fd = 8
05:05:39.363 [1481] <8> vnet_version_accept: [vnetd.c:1092] *actual_version 11 0xb
05:05:39.365 [1481] <8> ProcessRequests: [vnetd.c:731] msg Request VN_REQUEST_PBX_C_SUPPORTED(13)
05:05:39.365 [1481] <8> ProcessRequests: [vnetd.c:733] status 0 0x0
05:05:39.393 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused
05:05:39.394 [1114] <2> daemon_select_and_accept: vnet_registerPBXServer() failed: 47
05:05:39.395 [1482] <8> ProcessRequests: [vnetd.c:635] msg VNETD ACCEPT FROM 172.20.2.42.63972 TO 172.20.8.49.13724 fd = 8
05:05:39.408 [1482] <8> vnet_version_accept: [vnetd.c:1092] *actual_version 11 0xb
05:05:39.410 [1482] <8> ProcessRequests: [vnetd.c:731] msg Request VN_REQUEST_PBX_C_SUPPORTED(13)
05:05:39.410 [1482] <8> ProcessRequests: [vnetd.c:733] status 0 0x0
05:05:39.580 [1481] <8> ProcessRequests: [vnetd.c:718] msg Request VN_REQUEST_CONNECT_FORWARD_SOCKET(10)
05:05:39.580 [1481] <8> vnet_generate_hashes: [vnet_vnetd.c:1592] hash_str1 095753ef74264d5a8d85d7f25b2c2b02
05:05:39.580 [1481] <8> vnet_generate_hashes: [vnet_vnetd.c:1593] hash_str2 f3bdb5b113d608ecf9aabbc675e6079a
05:05:39.580 [1481] <8> process_connect_forward_socket: [vnetd.c:1972] ipc_string /tmp/vnet-01481437692739580419000006446-8_ai5c
05:05:39.622 [1482] <8> ProcessRequests: [vnetd.c:718] msg Request VN_REQUEST_CONNECT_FORWARD_SOCKET(10)
05:05:39.623 [1482] <8> vnet_generate_hashes: [vnet_vnetd.c:1592] hash_str1 b2999846c37ef6234b670be146b793e7
05:05:39.623 [1482] <8> vnet_generate_hashes: [vnet_vnetd.c:1593] hash_str2 32c0dd8440f0e6d7538b74a1f9712795
05:05:39.623 [1482] <8> process_connect_forward_socket: [vnetd.c:1972] ipc_string /tmp/vnet-01482437692739623212000006446-Naaq5c
05:05:39.945 [1481] <8> vnet_send_network_socket: [vnet_vnetd.c:1400] hash_str2 f3bdb5b113d608ecf9aabbc675e6079a
05:05:39.945 [1482] <8> vnet_send_network_socket: [vnet_vnetd.c:1400] hash_str2 32c0dd8440f0e6d7538b74a1f9712795
05:05:39.946 [1482] <8> ProcessRequests: [vnetd.c:720] status 0 0x0
05:05:39.946 [1481] <8> ProcessRequests: [vnetd.c:720] status 0 0x0
05:05:39.951 [1114] <2> vnet_registerPBXServer: ../../libvlibs/vnet_pbx.c.120: pbxRegisterEx failed with error 146:Connection refused

Is it any hotfix for Solaris client? Or latest version of agent, for example.

Makin all moves described in NetBackup status codes about "NetBackup status code: 6"

With best regards

Hi Guys

I have requirment to move a Netbackup client machine temparalry to another master server from it original . What are the steps that I need to follow to move this client ?

Is that just  change master server name in bp.conf file ? 

New Master server running on Windows

Existing client on Suse Linux

Dhananjaya